3/16/2023 0 Comments Keep drive spinning all the time![]() Perhaps there has been some other change that changes the way the QNAP 'sees' the Mac USB port? You might try the RAID Manager, see if that gives you additional options. I believe I've got the default hibernation time of 15 minutes set on all of my units. Starting and stopping multiple times a day is hard on the motors in the drives. With regular use, a head crash, or other. However, any time you are on the computer and doing tasks, the operating system. Yes, disk hibernation is rougher on the disks. This can be caused by all manner of things, from a power cut or surge to physical shock to a manufacturing defect. The RAID enclosure only enters standby mode if the USB power design of the host supports this feature. In most cases, a hard drive shouldnt spin when it is not in use at all. HDs should not be spinning up after they are already running (they should be running at constant RPM). The host enters hibernation or standby mode or is powered off.The RAID enclosure enters standby mode under the following conditions: Upon waking, the RAID enclosure returns to the previous system state and any paused processes are resumed. When the RAID enclosure enters standby mode, the system fan and installed HDDs stop spinning, and system processes are This is usually referred to as hard drive. *"The RAID enclosure features standby mode to help reduce noise and power consumption. To conserve energy, hard disk and optical drives are designed to spin-down after a specific period of inactivity. I tell it to eject disc, it says it refuses or cant eject the disc. Works, disc is spinning like mad constant all the time. UDF files system is used for DVD-RAM discs. For the firmware, the user guide says that there is a default Standby Mode: Win10 erased disc, then gave me option to format as UDF or as DVD files. One of the most common problems that prevent Windows systems from accessing external storage drives is bad physical connections. The device can be run via firmware, in which case here are DIP switches to control the RAID mode, or via a Mac App (QNAP External RAID Manager). ![]() You need to go into QTS and set the appropriate settings to disable Standby mode. In this case, the QNAP is controlling the drives, not macOS. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |